So I hooked my boat up to the fake a lake (plunger type) this morning so I could warm up the boat to change the oil. After I started it I noticed there wasnt any water coming out of the exhaust so for some reason water wasnt getting through the system. After messing with it for awhile I took the hose off the thru hull and connected it directly to the water hose. This set up worked great and water would flow out of the exhaust when the boat was running. So my question is will I have any problems priming the system when the boat is in the water or was it just not working because of the bad seal between the fake a lake and the hull? I also just changed the impellar so I was concerned that maybe I didnt get back in right but everything appears to be in order there. (Message edited by maxx_wake on March 14, 2009) (Message edited by maxx_wake on March 14, 2009)
|