We ordered a Fly High System (the pro tour ballast system) for our 2008 X Star and my staff and our poor dealer are all beating our heads against the wall trying to get the darn thing to work as advertised. The X-Star itself is awesome, but the Fly High system, thus far, is not. Our dealer installed it correctly and I personally verified everything was done right, but the troubleshooting instructions are non-existent and Mike at Fly High has not been very helpful thus far at resolving our issues. We simply LOVE the wake on the X-Star with the system filled and 3-400 lbs upfront, and it’s already installed, so our plan A is to just try and get the system to work as Fly High advertised. Here’s our problem, so please chime in if you can help: The timers (or sensors?) on the X-Star shut the pumps off every 10 seconds when we go to drain either the stock ballast or the Fly High ballast. We do know how to reset the timers and both the stock ballast and the Fly High system seem to fill just fine. But, when we go to drain either, it gets about 1/2 way drained and then the timers turn the pumps off every 10 seconds. We then have to have someone sit in the driver seat and turn the pump switches to drain, then to off - repeating until they are drained - which is really annoying. There are no instructions for resetting the drain timers so that could be it, but who knows. We also thought of taking the timers out. Anybody dealt with this issue?? Anybody get their system to fill and drain properly?
|