Nor Cal Powdercoating???

(mike_t) · (mike_t) **Join Date: Aug 2004** 02-01-2006, 1:53 PM

One of my winter projects is to re-powdercoat my Flight Control Tower on my SAN. I took it off and took it down to a local p/c shop and they quoted me $350...Does that sound about right for the Bay Area? I searched thru old posts and people sounded like they were getting quotes for $100-$150, but they did not list where. Can anybody recommend a decent shop...Thanks

(grant_west) · (grant_west) **Join Date: Jun 2005** 02-01-2006, 2:00 PM

I get tower's done for $250
Dave Blank @ Penisulaprecision@msn.com
650 369 0948
They are located in the heart of the Ghetto of Redwoodcity. Be sure to tell Dave I sent you so I get the extra 100 dollrs he charges LOL J/K .

Dave does great work, And he doses them in 1-2 days

(jwag) · (jwag) **Join Date: Apr 2002** 02-01-2006, 2:05 PM

Spray Technology is great in Santa Clara as well
408-727-0680

(marknjenn) · (marknjenn) **Join Date: Feb 2005** 02-01-2006, 3:07 PM

If your willing to drive to the central valley, try B&C painting solutions in French camp. The GM there is a boarder. Name is Gary. (209)982-0422 Or try Eagle painting in Tracy. Both good Shops and should be reasonable.

burningpeach 02-27-2006, 12:46 PM

you could try Nor Cal Powder Coating in Ukiah. You can request a quote thru their website or get their contact info here: http://www.ncpci.com/

Good luck!

(Message edited by burningpeach on February 27, 2006)

(joe1975) · (joe1975) **Join Date: Jan 2006** 02-27-2006, 3:42 PM

US powder coating in Rancho Cordova should do it for no more than $200. Sorry i dont have their numbe to post. There are a lot of powder coaters in Rancho Cordova...worth the drive maybe.

(allen) · (allen) **Join Date: Apr 2005** 02-28-2006, 8:21 AM

Maas Brother's in livermore, (925)294-8200
They do all my work and do a great job.
Al

(wakejunky) · (wakejunky) **Join Date: Apr 2002** 02-28-2006, 8:37 AM

US Powder coating is the place where WCCC brings their towers for PCing. I'd try there. I know what they were paying so, $200 would be a good deal.

Chris
Get the Grip you Deserve
www.wakejunky.com

(wakejunky) · (wakejunky) **Join Date: Apr 2002** 02-28-2006, 8:40 AM

While you're at it you might as well PC your flight clips as well. I'm in the process of PCing my flight clips, rear vent pieces and custom flight clip spacers.

Chris
Get the Grip you Deserve
www.wakejunky.com