Wetsounds Pro 80's on a Moomba XLV?

(mcook77) · (mcook77) **Join Date: Feb 2004** 04-12-2007, 4:24 AM

Has anyone ever installed or seen Pro 80's on a XLV? The tower diameter is 2 3/8 and according to Wet Sounds website, they go from 2 1/4 to 2 1/2. I have also sent them a message this morning asking this same question.

I also do not modifying somehow if necessary, just need any advice from personal experience that anyone may have.

Thanks in advance!

(malibuboarder75)

The tower inserts come with these adhesive rubber pads. It will probably give you the extra 1/8 of an inch you will need. Ask them, they will definately know.

(jnewton7) · (jnewton7) **Join Date: Jun 2005** 04-12-2007, 6:11 AM

I have seen the wetsounds 3-some installed on a gravity games xlv. Very nice setup.

(jon_a) · (jon_a) **Join Date: Feb 2003** 04-12-2007, 7:06 AM

You use the 2 1/2 rubber inserts. You have to make sure to tighten down the screws on the mounts super tight so they do not slip but they work great.

(mcook77) · (mcook77) **Join Date: Feb 2004** 04-12-2007, 7:29 AM

Thanks for the info guys!

I also received an e-mail back from Wetsounds describing what Leo said above.

(wake_upppp) · (wake_upppp) **Join Date: Nov 2003** 04-12-2007, 6:11 PM

The 2 1/4 inserts will go on a 2 3/8 tower. My tower is 1 7/8 and I used the 1 3/4 inserts cuz the 2's were slipping and the clamp was all the way tight. An 1/8 smaller is the way to go cuz they are rock solid.

(mcook77) · (mcook77) **Join Date: Feb 2004** 04-13-2007, 5:10 AM

Cool - thanks for the heads up on that Sparky. I placed my order for a pair this morning!