|
Join Date: Mar 2007
08-09-2016, 2:48 PM
|
Reply
|
Saw this on facebook today - much better price than the mission:
https://www.wakesurfedge.com/
|
Join Date: Jul 2015
08-09-2016, 2:57 PM
|
Reply
|
If they don't get sued then they will make a killing. That's the perfect price point for this device.
|
Join Date: Jun 2015
08-10-2016, 5:09 AM
|
Reply
|
Considering you can build one yourself for $40 bucks that's still outrageous. I built mine following the Moomba forum with a suction cup handle, shelf brackets and a cutting board for about that much and an hours worth of time. It's certainly a difference maker, but not one worth spending hundreds of dollars on when you can DIY.
|
Join Date: Oct 2011
08-10-2016, 5:24 AM
|
Reply
|
that is different enough that it'll be hard to sue - much better than velcroe
|
Join Date: Mar 2007
08-10-2016, 6:28 AM
|
Reply
|
Quote:
Considering you can build one yourself for $40 bucks that's still outrageous.
|
I have DIY'd two now and $40-$50 is about right for what it costs .... but I think your average Joe is certainly willing at $200 vs $600
Heck, if this would have come out first I would have been apt to buy it vs. trying to make one.
|
Join Date: Feb 2013
08-10-2016, 9:30 AM
|
Reply
|
it looks like it's well built. The thing about doing it yourself is that well, it looks like you did it yourself. 200 bucks? done. That's one fill.
|
Join Date: Jul 2015
08-10-2016, 12:47 PM
|
Reply
|
Quote:
Originally Posted by JR_88
Considering you can build one yourself for $40 bucks that's still outrageous. I built mine following the Moomba forum with a suction cup handle, shelf brackets and a cutting board for about that much and an hours worth of time. It's certainly a difference maker, but not one worth spending hundreds of dollars on when you can DIY.
|
Factor your time, if you spend 1 hour shopping and 2 hour building @ 50 an hour your allready at 150 bucks...
might aswell have a warrantable professional looking product.
Price point is right.
|
Join Date: Jul 2015
08-10-2016, 5:59 PM
|
Reply
|
Quote:
Originally Posted by jibsta210
Factor your time, if you spend 1 hour shopping and 2 hour building @ 50 an hour your allready at 150 bucks...
might aswell have a warrantable professional looking product.
Price point is right.
|
This. And now that I've been through 5 or so versions and have one that works I must have put in 10-15 hours and easily $100 in materials.
But if I lost mine tomorrow, I would probably buy this rather than going through the hassle.
|
Join Date: May 2016
08-15-2016, 7:00 AM
|
Reply
|
We're seeing several options now of side-hull surf gate style attachments. It's amazing how simple the designs are, yet we missed it for so many years! Here's the latest list of options I've seen: http://www.wakegarage.com/resources
I think the fact that the attachment being just forward of the transom dodges the surf gate patents, but I'm not sure.
|
Join Date: Jul 2008
08-15-2016, 7:42 AM
|
Reply
|
Then you may run into lawsuits from the patents from Ronix or Mission.
|
Join Date: Jun 2011
08-15-2016, 9:11 AM
|
Reply
|
don't buy the swell... i had a customer bring one in today and its not a good design. look close at how the suction lever does not flip all the way down. it stops at a 45 degree angle on the mount and comes off easily.
|
Join Date: May 2004
Location: Tyler
08-17-2016, 10:33 AM
|
Reply
|
The price is RIGHT, Bob!!
different from boat manufacturers patents because its not part of the boat. not sure what the Ronix patent says, but this is significantly different in many ways. If the Ronix patent is broad enough to cover this, I don't think it would stand up.
whats the swell?
Last edited by denverd1; 08-17-2016 at 10:38 AM.
|
Join Date: May 2004
Location: Tyler
08-17-2016, 10:51 AM
|
Reply
|
found the swell. yea it looks quite clunky, I can see how the cup wouldn't hold suction with the thickness material there.
|
Join Date: Jul 2002
Location: WI
08-18-2016, 9:42 AM
|
Reply
|
While we are looking at alternatives, I just picked up one of these: http://suckgatewakesurf.com/
I know I can make one for less but I don't have the time and I was not about to pay $500 for some of the alternatives. I just received it a couple days ago. It is very professional looking in both design and fit and finish. It took a little over a week to get here via UPS even though it was shipped immediately. I've not tried it yet since it just arrived. I'm looking forward to trying it this weekend.
|
Join Date: Sep 2004
08-18-2016, 7:48 PM
|
Reply
|
The big thing I see missing from most of these suction handle based designs is any mention of rust prevention. As has been shown in several different discussion threads the hardware in those handles will begin to rust from the first time they go in the water. Having built and sold a few myself I think $200 is a fair enough price point, but not if it's going to rapidly deteriorate and potentially get rust stains on your upholstery. I can tell you it's time consuming and tedious to modify for rust prevention though, so I see why they wouldn't want to do it.
The wakesurf Edge says it's stainless, if that includes the springs and all hardware then I'd say it's a deal. Any feedback on how it does on hulls that aren't totally flat? seems like it wouldn't have much leeway due to the lowrider design.
|
Join Date: Apr 2002
08-18-2016, 8:36 PM
|
Reply
|
Mint! Just ordered one
|
Join Date: Jun 2014
08-19-2016, 7:28 AM
|
Reply
|
Quote:
Originally Posted by shagman
The big thing I see missing from most of these suction handle based designs is any mention of rust prevention. As has been shown in several different discussion threads the hardware in those handles will begin to rust from the first time they go in the water. Having built and sold a few myself I think $200 is a fair enough price point, but not if it's going to rapidly deteriorate and potentially get rust stains on your upholstery. I can tell you it's time consuming and tedious to modify for rust prevention though, so I see why they wouldn't want to do it.
The wakesurf Edge says it's stainless, if that includes the springs and all hardware then I'd say it's a deal. Any feedback on how it does on hulls that aren't totally flat? seems like it wouldn't have much leeway due to the lowrider design.
|
The seastow handles use stainless steel springs. I have been using an aluminum handle one for 2 months now and no rust yet. We drain the water out of the cups every time and sun it on the dock when we get back. . I have a seastow handle ready to go when needed but the aluminum one stays on so well I am reluctant to change over yet. Never had it fall off once so far, hope I'm not cursing myself saying that for riding today though.
At 200 for a well made one with stainless parts, I would probably stop making them myself too, seems reasonable to me.
|
Join Date: Sep 2004
08-19-2016, 2:29 PM
|
Reply
|
Quote:
Originally Posted by drballenbc
The seastow handles use stainless steel springs. I have been using an aluminum handle one for 2 months now and no rust yet. We drain the water out of the cups every time and sun it on the dock when we get back. . I have a seastow handle ready to go when needed but the aluminum one stays on so well I am reluctant to change over yet. Never had it fall off once so far, hope I'm not cursing myself saying that for riding today though.
At 200 for a well made one with stainless parts, I would probably stop making them myself too, seems reasonable to me.
|
Yes the Seastow does, but I haven't seen anyone selling a Seastow based design through a website and advertising it. Draining the cups and taking care to keep it dry will help for sure, but rust is inevitable on them eventually, especially since I'm sure many won't take that kind of care with them. Cutting drains in the side with a Dremel helps a bunch, BTW.
I've been selling my design locally for $150, but if I were to take the trouble to make a website, advertise, ship them, and potentially deal with patent claims I'd be at $200 for sure. And I have to think most people complaining about the $200 price point would be as well if they were trying to sell them.
|
Join Date: Jul 2009
08-22-2016, 10:05 AM
|
Reply
|
I agree - I think $200 is fair. (or $150 if you choose). I figured 2 hours of my time & $30-$50 materials is worth that. I built mine - but only because I had my old ghetto gate laying around. I used the new suck gate version & it's just as good as my ghetto gate - and 8 pounds lighter!!!
Great design.
|
Join Date: May 2013
Location: Vancouver WA
08-22-2016, 1:02 PM
|
Reply
|
Quote:
Originally Posted by shagman
The big thing I see missing from most of these suction handle based designs is any mention of rust prevention. As has been shown in several different discussion threads the hardware in those handles will begin to rust from the first time they go in the water. Having built and sold a few myself I think $200 is a fair enough price point, but not if it's going to rapidly deteriorate and potentially get rust stains on your upholstery. I can tell you it's time consuming and tedious to modify for rust prevention though, so I see why they wouldn't want to do it.
The wakesurf Edge says it's stainless, if that includes the springs and all hardware then I'd say it's a deal. Any feedback on how it does on hulls that aren't totally flat? seems like it wouldn't have much leeway due to the lowrider design.
|
I saw a couple drips of rust from my Harbor Freight handle after the first couple times I used it. And not a drop of rusty water since. I've put a ton of hours on it and haven't had any issues. Dunno. it's a $8 handle and if I actually started having problems with the springs, I could change them out in a couple minutes from a spare handle I have in my garage.
|
Join Date: May 2013
Location: Vancouver WA
08-22-2016, 1:06 PM
|
Reply
|
Quote:
Originally Posted by sporte77
I agree - I think $200 is fair. (or $150 if you choose). I figured 2 hours of my time & $30-$50 materials is worth that. I built mine - but only because I had my old ghetto gate laying around. I used the new suck gate version & it's just as good as my ghetto gate - and 8 pounds lighter!!!
Great design.
|
Yeah, mine took me an evening of fabrication. I spent $8 on the handle, another couple bucks in SS screws. The HDPE was stuff I had laying around from other projects, so I'm into mine maybe $10 tops.
I started with a smaller blade and then upped my surface area in a "quick and dirty" upgrade right before we left for a camping/boating trip.
version 1 before adding a little more surface area.
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -7. The time now is 6:20 PM.
|
|