We spent a couple years working with our amplifier engineer (zeff) on the design of the Sinister (SD) series to produce the highest performing marine amplifier ever built. Goals were: Power, Sound Quality, Efficiency, Feature Set, Ease of installation, Build Quality
Since they have been so well received we took everything we did on the SD series and we scaled that down into the SYN DX and HTX series. All the amp series share a family look. With less power as you go down in the series as well as different features. The three series are the HTX, SYN DX and SD. So a good- better- best line up. All are full range class D, single side connections, raised end caps for cooling and wire management.
Feature set varies by model. Lets take the 6 ch's for example, the HTX6 is even power across the board at 100x6 and bridged for 300x3, the SYN DX 6 is 125x4 and 150x2. The SYN DX 6 can be run in 3 ch mode for a REV 3-Some with 400x2 and 600x1. The SD6 is 185x6 and bridges to 585x3. It has variable bass boost on csh 1-2 or all channels since it has the power to run 3 subwoofers all off one amp. As well as the REV 3-Some and other set ups.
Tim
Wet Sounds
|