Quote:
Originally Posted by flintwake
Do you just run one positive wire and one negative battery to this block from the battery and then one pos and one neg from block to each amp ?
|
It has a spot for dual 0 or 4 gauge B+ inputs, and 4 4gauge outputs. The ground is the center one and only has a spot for 1 0 or 4 gauge ground, and again 4 outputs. I have a dedicated battery bank and perko, so I ran from the B+ on one of the stereo batteries to the perko, then to the distro. The ground will go straight to the common ground of your battery bank battery, or the battery all your grounds terminate at.