I think I can get away with 1/0 gauge, but I want to make sure.
My amps are:
Diamond D5 1200.1 Class D - Will be running at 1 ohm producing 1200w RMS
2 Diamond D3 600.4 - One of them is bridged 300x2RMS, the other running 75Wx4RMS
The distance from the batteries to the amps will be around 6'. Is 1/0 Gauge for the power and ground enough or should I go up to a 2/0?
I've found it difficult to find distribution blocks for 2/0.
Any idea of what fuse size I should be running with this? Is a 250 amp breaker enough?
|