I used two Fly High side sacs, one under each seat. I installed a pump at the center drain hole and ran the hose along the drivers side all the way to the front. I vented the line at the bildge drain with a check valve. At the very front, I tee'd the two bags together. For draining, I put the pump at the very front, tee'd it off and ran 3/4" tubing into each bag, and all the way to the back of the bag(so it could drain fully when the bow was up). I used an existing hole on the drivers side at the rear of the boat. By using two seperate bags, I had room for my pump under the front little seat, along with a spot for an anchor. I cut out plastic panels that fit under the seats, between the seat frame and bags. This kept the bags from pushing up the seats. Sorry, no pics.
|