Powering DBots?

(tyler97217) · (tyler97217) **Join Date: Aug 2004** 06-30-2008, 6:40 AM

I have 4 dbot 8" that I am getting ready to have installed. I am going to power them with Rockford Fosgate Power series amps. Is the 400.2 large enough to power them or should I jump up to the 600.2?
Thanks

(05mobiuslsv) · (05mobiuslsv) **Join Date: Apr 2006** 06-30-2008, 7:15 AM

I would do the 800.2.

(tyler97217) · (tyler97217) **Join Date: Aug 2004** 06-30-2008, 7:24 AM

I have a buddy that is running 600.2 to his and they sound great... I always thought you would want the 600.2 or 800.2 as well....

(tyler97217) · (tyler97217) **Join Date: Aug 2004** 06-30-2008, 7:29 AM

or how about a 400x4 bridged? Do I achieve the same power then?

(05mobiuslsv) · (05mobiuslsv) **Join Date: Apr 2006** 06-30-2008, 7:44 AM

If you didn't have to stay with fosgate you could do a kicker 850.4 which would give you almost 200 watts rms. You can't do a 4 channel amp bridged to 4 speakers the impedence will be to low. If you have a buddy running the 600.2 and like the way it sounds why not just go that route..