Binding Question

(06outbackv) · (06outbackv) **Join Date: Dec 2006** 08-17-2007, 8:05 AM

I have a stupid question and I hope I dont get ripped to bad for asking so,,,,,,Can I put Liquid Force bindings on my hyperlite board,,, and how do I go about doing this? Thanks

(innov8) · (innov8) **Join Date: May 2005** 08-17-2007, 8:12 AM

You should be fine, most bindings fit on all boards, if anything you might need to add a washer, if they won't bolt down tight to the board.

(thane_dogg) · (thane_dogg) **Join Date: Jun 2002** 08-17-2007, 11:49 AM

I've been riding this setup for a while now.

You have to add one extra washer the the claw assembly, or you can go to the hardware store and get one increment shorter screw; however, I've found that the latter option you have to remove the single washer from the claw assembly because the shorter screw will then be too short.

Hope I helped.

(Message edited by thane_dogg on August 17, 2007)