Tower speaker wires

(mikeski) · (mikeski) **Join Date: Aug 2003** 12-11-2004, 1:21 PM

I really liked the cable I ended up using on my tower speakers. The cable is very heavy and flexible, I didn't even use grommets (something I usually do). I found out how durable was when I realized the tow rope was hooked on the corner of my Monster Tower where the wire came through AFTER I was boarding. The outer jacket of the wire did get slightly cut but the inside insulation was fine. This stuff is what I will be using on my next tower too. The sellers are pretty decent to work with too.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=41462&item=3767921 140&rd=1&ssPageName=WDVW

If this expires search for EWI, NL4, or audiopile, on e-bay.

(Message edited by mikeski on December 11, 2004)

(norcalmalibu) · (norcalmalibu) **Join Date: Jun 2004** 12-11-2004, 6:37 PM

the cable looks like like good quality..How did you connect the ends to your speakers, and to your amp?

(mikeski) · (mikeski) **Join Date: Aug 2003** 12-11-2004, 11:43 PM

I ended up not using the Neutric connectors, just went straight through the hull leaving a loop under the side so I could splice it back together if ever needed. Here is the speaker connection. The waterproof backplates for the speakers were still on backorder when I sold the boat so this is how they remain.

Speaker connections