Im fairly new on the forum. I have been doing a lot of reading, thanks for the great info. I'm putting in a shower on a scorpion 5.7. I'm going to pull the hot water off the sided the block. But for cold water I was wondering if I could T into the raw water before the v-drive. So between the hull and theVdrive, then in the fall I could use that T to winterize the whole drive system. Or should I splice in to the water line right after the raw water pump. I just don't know if shower pump needs pressure to it. Anyone have any thoughts
Thanks
Giddyup
2009 Calabria pro V2
|