Quote:
Originally Posted by One2Many
To answer some of your questions Shawndoggy
1. I don't know what crossovers are unfortunately.
2. So I've been told, would the JL audio HD 750/1 or the Arc audio ks 600.2 be a better option then a syn 4?
3. I am familiar with distortion, I don't recal hearing any out of my speakers.
|
If you don't know what crossovers are, odds are you don't REALLY know what distortion sounds like till it's too late. I thought I had an ear for distortion till I tuned my system with an SMD and was I ever wrong. My guess is you were clipping the amp/speakers and possibly have the crossover set wrong. The SYN6 definitely is underpowered for what the Rev10s can handle. Before cranking the replacements you need to look into someone knowledgeable to tune your system, or start reading and learn how to do it yourself.
I assume you're running each Rev10 bridged mono @ 4ohm on Channels 1/2 - 3/4 with the SYN6. The crossovers needs to be set in HP (high pass) and the frequency about 80Hz. I would start with the gains around 1/3 - 1/2 an adjust from there.
To fully enjoy the Rev10s one of the amps mentioned above would really be a better choice. If you want to stick with a 6 channel amp look into the SD6.