Nope, you are still only able to use that amp in 4 ch-4 ohm mode with 4 speakers. So only diff is 125x4. Ignore the 2 ohm rating as it does not apply in this application. But based on that spec. You had it hooked up on 2 chs and 2 ohm. So 250x2 split between the 4 speakers. So in theory, 125 per speaker. Although now, running the amp at 4 ohms. Will give you some head room as you will not be running that amp at 2 ohms. So it will be able to play cleaner and cooler. Plus you can gain the MB-8 on their own as well as the 60's on thier own. So you can cross over the MB-8 lower and gain it how it should be. And cross the 60's over a bit higher to get cleaner sound. So just be being able to do this. You should notice a big difference. Even if the power is not much of a change. Tim Wet Sounds
|