I have a 1988 nautique and a Skylon extended pylon to go with it. The problem is that the curve on the existing pylon seems to prevent me from adding the extended pole. Anyone have the same problem and figure out an effective workaround?
Yeah I used a 3in pvc pipe to keep it from getting hung on that spot, made it real ez to get off when I needed to get it in the garage. Just cut the pipe so the pylon will hit it just above the curve in the factory pylon
it should have came with three different colors of sleeves red white and yellow.I have an 86 nauti and my pole sits at the bend about 3 inches up from the pole.Is that bad???
votas: no, it doesn't sit flush, it sits up a little above the curve. i don't have any problems with it. Chris: i use the yellow protective sleeve. the red one is too tight for the pylon to slip on.