I pulled my rudder after bending it on a rock, installed a new drive shaft and rebuilt the prop. Back to the rudder, it had a good bend in the shaft, I took it to a machine shop, they bent it back straight, did a slight bit of machine work to the shaft (true it up) and I have re-installed it and it works perfect. I got the work done for free thru a buddy of mine but it probably would have cost about 1 hours shop time - $75.00 to $100.00 CDN. I would shop that arround first and get thier opinion, you would be surpised what those guys can build and repair.
|