my friend bought a joyride board used off of ebay but the guy took the fins off the board. it has small molded in fins but he didn't like riding it without them. what fins will work for the board because it has the one screw through the middle and then two little things sticking out to hold the fin from moving side to side-one on each side of the screw. the hyperlite hole pattern is just two screws, right? so hyperlite or rainbow fins will not work. it looked like from the picture that the liquid force xlf fin would work, can somebody tell me if it has the right hole pattern or what fin does? originally the board comes with a 6 inch long by 1 inch deep fin. thanks for any help
|