Good advice from both jbjboc and flux, I'd just add that what seems really comfortable at first may not always be the setup for best control. I originally set my bindings pretty well ducked out (maybe about 20+ degrees), but when I took a lesson the pro suggested that I put my feet a little more parallel. The reason? When your feet are ducked out alot you have less leverage on the board for toeside and heelside because the lever arm is shorter (the point where you are applying pressure is closer to the board centerline). Also, your feet and ankles are built to provide maximum support/control along their centerlines, not off-axis. Try this test --- stand with your feet ducked out 30-45 degrees and rock back and forth between your toes and heels like you were turning. Now put your feet parallel and do the same thing. Both stances are exaggerated, but you'll get a feel for the trade-off between comfort and control. As far as stance width is concerned, I found a slightly narrower stance than what I had been using before kept the board from getting squirrely and sideslipping. Bottom line is that it takes some experimenting to find what's right for you. Don't be afraid to mess around with your stance until you find out what's "just right".
|