OK wasn't quite that bad, but it could have been. We get to the launch for the first time this year and the guy in front of us forgets his plug for his boat. New boater didn't have a clue, it was kind of funny. So I put my boat in take the tower down and go under the bridge and start getting set up. Start filling the ballast tanks and the rear ones won't fill. Kind of think that's a little strange then all of a suddon the bilge starts pumping water. I check down below and my bilge area is almost too the top with water!! I emptied the front bag with no problems however I couldn't pump the water out as fast as it was coming in it seemed. Pulled the boat out and drained the bottom of the boat out, all the plugs were in. During the winterization process do the dealers take the hoses off and blow them out. COuld they have hooked them up wrong and I was pumping water into my boat??? Any suggestion. I have a call into the guy that winterized the boat but has this ever happened to anyone else? I'm just speculating that's the problem, anyone have any ideas?
|