|
The model should be on a sticker on the magnet. I think it was a KS model. However, that model has LONG since retired, so you likely wont be going back with the same model. The new model would actually be a true marine speaker, the KM654. Add an "L" to the end and you get LEDs.
Should be a typical 6.5" with a 5" cutout.
Remove the windshield. Much easier then it looks. Easy with a helper. Much faster then turning out screws 1/4 turn at a time, only to find you need to do some trim work for the added depth of the new speakers.
|
Threaded Mode