|
06-26-2004, 5:11 PM
|
Reply
|
I don't have a wakesurfboard, I have a 6'0 short surfboard though, and I've been trying to ride with that. I can't stay up on the board. I'm riding behind a malibu wakesetter, with 3 ballasts and a wedge. I've been riding about 10-15 mph, with about a 15 foot rope. Am I doing anything wrong? I just can't keep the speed up when I throw the rope in the boat. Thanks a lot for anyones help.
|
06-26-2004, 6:42 PM
|
Reply
|
slow the boat down... im normaly around 9mph, but when we have TONS of weight in i ride at about 11mph max... try slowing it down, and also weigh down the side your surfing alot more, if not all the weight, on the side your surfing... that should help
|
06-26-2004, 6:54 PM
|
Reply
|
Check out this link for a video. It may help for you to see it done instead of having someone describe it to you. http://photos.wakeboarder.com/showphoto.php?photo=4419
|
06-26-2004, 7:54 PM
|
Reply
|
Thanks
|
06-26-2004, 7:58 PM
|
Reply
|
Is it easier to ride frontside or backside. I've been trying backside.
|
Join Date: Jan 2004
06-27-2004, 7:31 PM
|
Reply
|
On the wakesetter drain one side of the ballest,also have everyone in the boat sit on one side and add additional ballest if you can, go around 10.5 mph and try ridding on your toeside, here is a picture to give you a better idea of what im talking about.
|
Join Date: Jan 2004
06-27-2004, 7:34 PM
|
Reply
|
http://www.wakepics.com/view_single.php?medid=9730 here is a video riding behind my VLX to give you an idea of what can be accomplished
|
06-27-2004, 7:57 PM
|
Reply
|
ya man 10-15 is way too fast, dont weight the center either
|
Join Date: Jan 2004
06-28-2004, 9:16 AM
|
Reply
|
Well to make the wedge work properly(sp) its good to have at least a half full center MLS
|
06-28-2004, 4:23 PM
|
Reply
|
if I took a few 45lbs weights from my benchpress and put them in one side of the boat's storage, would that make a considerable difference to make an even bigger wake? I know I should still be able to get up fine behind what I've got now, but would that help enough to try?
|
Join Date: Feb 2010
07-19-2015, 9:20 PM
|
Reply
|
I have a V230, I weigh about the same as you, I'm 6ft. I put a 1100 build fat sack in the back an now I can surf. I don't think a couple 45 plates is going to do much. Go to wakemakers and see what they have for you. The guys down there are very helpful and will tell you what you need.
Last edited by scott; 07-19-2015 at 9:23 PM.
|
Join Date: Aug 2012
07-20-2015, 6:57 AM
|
Reply
|
How much do you weigh?
|
Join Date: May 2004
Location: Tyler
07-20-2015, 3:42 PM
|
Reply
|
those 45s under your fat sack would make a difference.
make a new thread for your boat and how to weigh it for surfing. "weighting (your boat here) for surfing"
also, don't throw the rope until you get your weight setup right.
|
Join Date: Oct 2005
07-20-2015, 3:58 PM
|
Reply
|
it helped our wake on my 07 VLX, to add more weight midship or up front
|
Join Date: May 2004
Location: Tyler
07-21-2015, 2:46 PM
|
Reply
|
no idea on malibu's, but my sanger LOVES weight in the front
|
Join Date: Jul 2010
07-26-2015, 2:54 PM
|
Reply
|
you wanna watch the wave and control with you heel is more difficult... so frontside is easier.
|
Join Date: Jul 2010
07-26-2015, 2:57 PM
|
Reply
|
I only can guess - the problem with you board ist: its hard to push it down with your heel. Slow acceleration and as soon as the boat starts, you push the edge of the board down with your heels.
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -7. The time now is 4:12 AM.
|
|