Titan -
Couple of suggestions for you.
The SD2 is the perfect WS amp for the sub however you might take a look at the 40 Hz enclosure (box specs are downloadable from the WS website) instead of the slotted enclosure. Many on this forum, including myself, have found it to be an excellent design for that sub and a lot less complicated to build.
Another SD 2 would be an excellent choice for your REV 10's as well. Wire 2 speakers in parallel to each channel will give you 310 watts per pod.
As for the 6x9's, I guess what I would do is figure out a way to add either another pair of those or some other size full range speakers in the cabin of the boat somewhere and then look at using a SYN 4 to power those 4 (up to 8) in boat speakers. With that big of a sub and those REV 10's you will probably need a few more in boat speakers to balance out the sound.
or if you don't want to add any more speakers, you could run an HT-2 to the 6X9's.
Obviously these suggestions are all considering your desire to run Wetsounds amps.
My .02
|