I've got a 2010 Sante that I am upgrading to WetSounds products including 3 amps. My old set up used 2 amps and were ran to the fuse panel connected to the perko switch.
Question is, can I run one 0 AWG wire directly from the battery closest to the amps split to three 4 AWG wires to the amps or should I run back to the perko switch.
Running directly from the battery requires less run, although I purchased the fosgate 0 AWG amp kit, so should have enough wire.
Thanks for your help!
(Btw, if you are considering WetSounds gear, go to Earmark audio and request Odin....the guy is incredible!!)
Nate
|