yup, we built the kicker with 2x's for the frame then used plywood for the kicker surface. After we had it all put together and floating, we used the FRP panel and used liquid nails to attach the panels to the plywood. Are you making the kicker a straight ramp or are you putting some bend in it? If you plan on putting a bend in the ramp, you will need to use the thinnest plywood because if you go too thick, I would say anything over 3/16", it will crack when you start to curve the wood and attach it to the frame. I will look for pics of mine and post later if I can find them.
|