Had the problem as well...figured out it was the board -was thicker in the center (LF fly series), so I sent it back to LF under warranty, they examined and found the same, and sent me a new board. *as a side note, the bolts that Ronix uses are too long for LF boards, so you do have to use spacers (little washers) to get them to tighten all the way down. JB Weld sounds like an interesting idea, and one I would try, but might void your Ronix 1 year warranty. Also, I have tried neopreme squares under the toe and heel -that worked the best to solve the problem quickly.
|