I need help figuring out what kind of terminal blocks I need for my ballast system. Here's what I want to do: I want to run one power wire from the battery up to a terminal block by the switches. I will then run three seperate wires from the terminal block to each of my three switches. I then want to do the same for the ground wire. . .one main wire from the battery to a terminal block which will be hooked to the three ballast switches. But, I have no idea which one I need. I already have fuses for the switches/pumps, so the block doesn't need to be fused. Could someone please take a look at the link below and tell me which terminal block(s) I need.
Also, what size wires should I use. I was thinking 8 guage from battery to terminal block and then 14 guage to the switches? Is that ok or is 8 guage overkill. Thanks a lot for any help!!!
http://www.boatersworld.com/webapp/wcs/stores/servlet/CategoryDisplay?storeId=10051&catalogId=10051&lang Id=-1&categoryId=342267&topCategory=249085&cat1=3100 29
Threaded Mode