After reading quite a bit about the ramps. gates, and suction cup water deflectors i decided to make my own.
Materials:
1 12" x 24" x 1/2" seaboard $19 on Amazon:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
1 suction cup glass holder $15 on Amazon:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
2 1/4-20 x 4" stainless carriage bolts $4 at OSH
2 1/4-20 stainless nylok nuts $0.50 at OSH
4 #10 x 1.5" stainless screws at OSH $1.50
1. Cut the seaboard as shown using a jigsaw with a coarse metal blade (cuts like butter)
2. Drill and screw it together
3. Stick it to the boat as low and far back as possible
4. Load up the boat evenly with plenty of weight
5. Go enjoy an awesome wakesurf wake
Wake pix are before and after my Nautique SV211 with full ballast, no passengers, a 500# bag in the center, another 500# in the walkthrough.