I just got a brand new Epic 23v this past week and when I went to use the swivel board racks on the Samson tower they would not budge. No matter how loose I made them they were stuck in one place. I completely took them apart and noticed that the rack is clamped around the tower and there is nothing in between the metal rack clamp and the metal tower. So the metal on metal caused a bunch of burrs to form and thus the rack gets stuck on them when trying to swivel. My question is; Is there supposed to be some sort of plastic/nylon washer or sleeve in between the tower and the board rack clamp so that is spins on that rather than metal on metal? Thanks for the help guys!
|