I am installing a 12" rockford sub with a mtx 280 amp. I hooked everything up and it worked great in my driveway and everything was fine. I took the boat to the lake and when I turned the key to start the boat everything just shut off. When I turned the key then nothing would happen. I unhooked the amp and put the boat back in the water and it started and worked fine. I have since tried hooking the amp back up and when I do the boat will not crank and the guages flutter and the ignition beeps repeatedly but nothing will happen. Now when I have the amp hooked up the power light on the amp will not come on but a voltmeter showed that 12 amps were getting to the amp. The boat still will not crank with the amp hooked up. Any help would be appreciated I am getting very frusterated.
|