ok so we get the lake last night and the center pump wont come on, i imidiatly take the switch panel off and grab the volt meter. they have a common power and ground to all 3 switches so its real easy to see where the power comes to the panel. the weird part is the top and bottom spade tab were powered up even when the switches were off.....so i couldnt figure out how to test the switch. anyone have a wireing diagram for these ballast switches?
so i decided to check to see if the pump was getting voltage. by the time we opened the rear hatch were the pumps are and got stuff out of the way to pull the cover panel, its started working again perfectly. so didnt get to diagnose anything yet again
found this. yikes, being reversable looks like the wire is a lot more complicated. havent figured out why the toggle tabs of the switch were always powered though.
http://forums.wakeboarder.com/viewtopic.php?t=7670