Alright my past winter consisted of a lot of projects. 1st- New Boat August 2008 2007 Malibu LSV Plain Factory- no racks, no stereo, stock 4 tanks ballast. 2nd- October 2008 started my ballast install that consisted of front bow sac, two 600# pound sacs for each compartment. Then for the days when it is just me and a few other riders a 750 in the floor. Here was the fun part everything plummed into the hard tanks and switches then the extra bags have there own drain pumps ran also tapped into dash board switches. 3rd- Started the Boat Garage building.I already had the concrete poured year earlier when i built the house. i am a Trim carpenter so eventually all the wall will looked like back wall does. and then alot of wakeboard swag will be on the walls. 4th- January ordered wakeboard racks. 5th - Started ordering all my Wetsounds setup throughout whole boat. Amps (4) pro 60's. 6th - Went with the Jl W13 Sub and custom box. Idea came from this site of a fello ww so wanna give thanks to him. This was my Favorite part. I did everything but rhino line the box. 7th - Boat still didnthave that glow to her so i had the windows tinted. 8th- Took my boat out with my run down worktruck and so guy at the boat ramp made a comment about my sweet boat and then went on to talk about my junky work truck. So then i pulled the string on my new toy puller. 2008 Ford f250 22's on 37's with 6 inch lift. 9th- I wanna thank Rob at Cooper Electronics in Oklahoma city for all the stereo gear. (Tim) at Wetsounds for answering all my questions along with everybody on this website. Hell answering all our questions is probably a full time job. (Tim)'s Customer service department for repairing my Sub amp which whatever reason shut broke after three hours first trip out. Fix it and got it back to me before my first big weekend. Every thing done to the stereo amps ballast system sub box design was all done by me during the long winter here in OKC so im ready to go out and have some fun with my new toys. I didnt spray the sub box, or design and wrap the amp tray. But the rest is all me. G inspired me and some of it could be better and some of it that is only thing i could come up with. I am very happy with everything. Oh yeah i welded every single piece of steel in that shop which i will never do again. Then some of my employees help me with insulateing and sheet metal due to all the wind here u should have seen all the parchutes we had with that insulation.
|