Big Ed dropped off his boat with all of his equipment already installed, and the system workin... We tore it all out and were starting over... Ed lost all of his storage under the passenger side and were giving it back to him. We are remounting all of his amps and making a new home for his two 10W6v2s.
The sub box is being made to fit under the dash, with neon, and blue mirror plexi. I just installed the plexi and it looks sweet, I cant wait to get the neon in there and see it!
Im not a big fan of just mirror plexi glass, I think it gives off too much light, and the inside of the box is too apparent. Soooo... I tinted these peices before i Put them in the box, check it out.
There is also going to be neon in the amp rack, but, shhhhh, dont tell Ed!
Old Sub Boxes:
Old Amp Location:
JL 1000/1 mounted upside down(cooling fins should be right side up):
This was the mess behind the panel:
I relocated all of the electronics on the forward wall and tied all of the wires back to give me the room for the Sub box:
The PPIs and the 1000/1 torn out to give Ed the room that he wants:
Sub Box Build up:
Sub Box in place with finish panel:
And BLING BLING, the tinted plexi inside the box: