I put 2 Infinity speakers on mine and could not here them. I added a second set and can hear them fine now. I read an article that described how volume is about the amount of air being pushed, so more speakers push more air therefore more volume, so I went with that. As for amps, wiring them in parallel will reduce the ohms and allow your amp to push more power to the set (as long as your amp is 2 ohm stable). My amp is rated at 150 watts RMS at 4 ohms, and 250 watts RMS at 2 ohms, so I am pushing 250 watts to each set of speakers which splits out to 125 watts per. Of course there are many on this board that are smarter than I, but I am just telling you what I did. (Message edited by chris_hargis on July 09, 2003) (Message edited by chris_hargis on July 09, 2003)
|