Quick release bimini clamps??

(nawakwa1) · (nawakwa1) **Join Date: Jan 2004** 03-15-2004, 1:17 PM

Has anyone see tower clamps for biminis that have quick release pins (not thumb screws)?
The pins sort of look like a cotter pin and are attached with a wire to prevent you from dropping them.

wolfpack 03-15-2004, 1:47 PM

That's what my bimini on my tige uses, and thats the only thing you have to undo to put it up. There are no screws to undo when out on the water.

(barry) · (barry) **Join Date: Apr 2002** 03-15-2004, 3:46 PM

I couldn't find any so I just made some.. really easy to do. The harware store should have the bar stock with holes.. Take one of those thunb screws down and match up the threads and tap your own. Takes about 2 minutes and you can make a spare set or so.
Cost me about 5 bucks to make 3 sets.
B-

(trace) · (trace) **Join Date: Feb 2002** 03-15-2004, 5:32 PM

like this?

http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&productId=35277&catalogId=10001& classNum=595&subdeptNum=58&storeNum=18

(nawakwa1) · (nawakwa1) **Join Date: Jan 2004** 03-15-2004, 7:11 PM

That is exactly waht I am looking for. I =am looking for that kind of quick release with the clamp.
Thanks