|
So here is the dilemma, I have the Rubicon 450s ordered and will be here in a couple weeks. But I am wondering what I need to run them. I have went through all the past posts, and here is what I came up with:
PPI DCX 1000.4
4-CHANNEL DCX AMPLIFIER
Does this make sense? Can I get away with something smaller and cheaper? If so what difference will I see with something smaller?
Thanks!! Specs are below.
Power @ 4 Ohms: 125 Watts x 4
Power @ 2 Ohms: 250 Watts x 4
Mono Operation: 500 Watts x 2 @ 4 Ohms
Fully regulated design for guaranteed power delivery
Flexible TC-X crossover with configurable line out
High-voltage input capability with selectable 12dB attenuation
Mixed mono/stereo operation
2 ohm stereo stable
Q BASS™ Plus
THD+N: 0.08%
S/N Ratio: >100dB
Freq. Resp.: 10Hz-50kHz
Damping Factor: >300
X/O Slope: 2-Way, 30Hz-4kHz, 12dB/Octave
Fan: Yes
QBass™: QBASS Plus/Remote
Dimensions: 23-5/8"x10-1/2"x2-3/4"
|
Hybrid Mode
