|
I have a 2007 Nautique 236 and have run into a road block for rewireing the tower. The tower speaker wires go through front port leg of the tower. The enter from below the deck, through a pass through bolt. The two stock wires appear to be 16 gauge, and are just big enough to not allow the passage of a third twisted pair.
On the starboard side, the anchor light wires pass through the same type of bolt and present the same challenge.
My intention was to run 3 x twisted pairs of 12 gauge variety to the tower. Now it appears the only way to do that will be running a deck type plug unless somebody else a viable solution....thoughts?
|
Threaded Mode