Tige boats.....need help on tower sizing

(jlembas) · (jlembas) **Join Date: Apr 2002** 05-01-2006, 10:17 AM

Does anyone know the size of tubing used on the 06 tige towers. Thanks.

(akdoc) · (akdoc) **Join Date: Feb 2004** 05-01-2006, 10:35 AM

2 3/8"

(jlembas) · (jlembas) **Join Date: Apr 2002** 05-01-2006, 2:21 PM

sweet. thanks.

(leetudor) · (leetudor) **Join Date: Oct 2001** 05-01-2006, 6:39 PM

Depends on where you are mounting something on what size clamp you will need.

(jlembas) · (jlembas) **Join Date: Apr 2002** 05-02-2006, 9:35 AM

Lee, would you mind expanding on that? Are you saying they use more than one size tubing?

(acurtis_ttu) · (acurtis_ttu) **Join Date: May 2004** 05-02-2006, 9:39 AM

Some tower manfactureres use a smaller tubing on their cossmember bars.

(acurtis_ttu) · (acurtis_ttu) **Join Date: May 2004** 05-02-2006, 9:40 AM

Some tower manfacturers use a smaller tubing on their cossmember bars.

00wakesetter 05-02-2006, 9:58 AM

I think Tige is all the same size. I dont know the size but all the tubing on the tower is the same.

(akdoc) · (akdoc) **Join Date: Feb 2004** 05-02-2006, 10:00 AM

If you mount a speaker clamp on the section of the tower that has more bend you may need a 2-1/2" clamp. I think that is what Lee is talking about.

(leetudor) · (leetudor) **Join Date: Oct 2001** 05-02-2006, 10:19 AM

A lower bar with out the bends is 2 3/8" but at the top were you would mount speakers they have a lot of compound bends and you have to use a 2.5" clamp.

(boomerang) · (boomerang) **Join Date: Feb 2006** 05-03-2006, 4:37 AM

Mine is 2 3/8

(jlembas) · (jlembas) **Join Date: Apr 2002** 05-03-2006, 10:18 AM

Thanks guys.