illusion x tower speaker wiring

(ndavis03) · (ndavis03) **Join Date: Jul 2006** 04-21-2008, 11:18 AM

I just got a 2007 VTX with the illusion tower, and want to run the wire for my tower speakers. I know that the tower is pre-wired for speakers, but what is the best way to get the wire on the driver's side, to the passenger side?

(cavlxenvy) · (cavlxenvy) **Join Date: Aug 2007** 04-21-2008, 11:25 AM

That wire on the drivers side "should" be for lights. All the speaker wire should be on the passenger side.

(ndavis03) · (ndavis03) **Join Date: Jul 2006** 04-21-2008, 11:35 AM

Okay, cool. I haven't really taken a good look at the tower wiring yet. I am trying to get as much done possible before taking it to the shop.

(larrys) · (larrys) **Join Date: Jun 2005** 04-21-2008, 12:04 PM

My 2007 and earlier Malibus have speakers wires on both sides. My 2008 was wired the way Ryan said.

(liljohn) · (liljohn) **Join Date: May 2007** 04-21-2008, 12:56 PM

07 will have speaker wire on the left side and light wire on the right. malibu only left 2 feet out of the tower. if you dont want to splice your wire i would plan on pulling new wire and using the old wire to pull it. that is what most people do and you will find it to be fairly simple.