|
Hey Guys,
I was just getting the boat pulled out and 'summerized'. I got a new battery this year and wired it up, the terminals are backwards to my existing, and I botched the connections and wired one backwards. After freaking out and disconnecting everything, let it cool down and set it up correctly. The boat started just fine. But now my stereo is not working...
I did blow the ANL 200 fuse that is inline to both amps. Since been replaced.
I checked all stereo in line fuses and they are intact. There is minimal to no draw on the yellow (memory?) line to the CMD4. The yellow will spike a .2-.1 reading when first connecting the multimeter, but then drops down to 0.
The red main power has a constant 10.98 volts.
What am I missing?
Any and all suggestions are helpful. Thanks!
JB
|
Threaded Mode