winch builders.

I am currently gathering the materials to build my own winch. I have a 10hp motor already. I was wondering if anyone had a materials list from their buildup. Or where I could get one.

i wrote this up a few days ago. this is the set up i have.
http://www.briggsengineoutlet.com/150212-2560.aspx -one-Motor
http://www.seattlemarine.net/productcart/pc/viewPrd.asp?idproduct=9374#details ---Comes in a 600 foot spool, - Line
http://www.mfgsupply.com/m/c/4-8247.html?id=bhbgeVzu ---One -Sprocket
http://www.mfgsupply.com/m/c/AZ2569.html ---This matches the sprocket i posted. and i bought 3. one for the sprocket, and 2 for the spool. i did this to keep them all the same- Hubs
http://www.mfgsupply.com/m/c/218355A.html ----One- Tav
http://www.mfgsupply.com/m/c/11-386.html?id=bhbgeVzu ----One -Chain
http://www.mfgsupply.com/m/c/11-402.html?id=bhbgeVzu ---As many as you want. i bought 4 to have extras, one comes with the chain-Master link
http://www.4wheelparts.com/Winches-Winch-Accessories/ATV-Roller-Fairlead.aspx?t_c=18&t_s=124&t_pt=5143&t_pl=4601&t _pn=WAR29257--- One- Fairlead
http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_21987_21987 ---Two-berrings
http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_21285_21285 ---one. you will have to cut this to length-axle

these are the links to pretty much all of the parts you will need to build a winch. you will have to buy the steel for the frame, the nuts and bolts, and key stock. I cant find where i bought my key stock. but it came in 1 1/4 inch pieces and you need a total of 3 so i bought 6. they are very cheap.
The links above are the cheapest is was able to find all of these parts. and all of them had quick shipping, i had no problems with any of these companies or parts. One thing i highly recommend, is that every Allen set screw, you put blue loc tite on they tend to come loose after about 5 minutes of run time. put some loc tite on, and let it sit for a a few hours before you run it. Hope this helps

if you need anything else. email me at lfrider92@gmail.com

thanks!!!

no problem. if you need any thing else or have questions shoot me an email at lfrider92@gmail.com
have fun!

any idea about how fast you get pulled at??

I like it P!

http://www.wakeboarding-winch.com/

not 100% sure on the speed it pulls. but if i could change anything i would make the spool diameter a little bigger. mine is 6 inches on the dot. i wish it was 7 at least though. if your building one. thats what i recomend.