monster racks

malibumania 04-16-2006, 4:07 PM

i have the 2005 monster racks and they dont fit hyperlite boards does anyone else have this problem and is the 2006 model the same

(mikeski) · (mikeski) **Join Date: Aug 2003** 04-16-2006, 4:19 PM

Is it the triangular tube or the circular tube? Call or e-mail Monster, they will take care of you. I have the old Monster racks and it's tight with my Hyperlite boards.

(ttuclint) · (ttuclint) **Join Date: Sep 2003** 04-16-2006, 6:58 PM

cut the rubber nub off.

malibumania 04-19-2006, 6:08 AM

its the one with the circular tube

(ttuclint) · (ttuclint) **Join Date: Sep 2003** 04-19-2006, 11:18 AM

thats not a 2005 rack.

malibumania 04-20-2006, 12:50 PM

how old are they

(t_brown) · (t_brown) **Join Date: Feb 2006** 04-20-2006, 3:18 PM

I just bought the tower, mirror and two adjustable racks and they fit all brands. I have two hyperlites and they fit nice and snug.

(jwat142) · (jwat142) **Join Date: Jan 2002** 04-20-2006, 5:18 PM

I know a guy who just bought a 2006 Hyperlite Murray board and it wouldn't fit in his Monster Tower Racks.

(ttuclint) · (ttuclint) **Join Date: Sep 2003** 04-20-2006, 7:32 PM

any board will fit in the new Monster racks, they have an adjustable width. The older racks did not.

(monstertower) · (monstertower) **Join Date: Mar 2003** 04-25-2006, 7:39 AM

If you look back a few years ago nearly all racks had an opening of just under an inch and nearly all boards were about 3/4"-7/8" thick. We saw boards & skates getting thicker and redesigned the racks to acoomodate this, as well as adjustable fork width to support boards with narrow binding stance. Unfortunatley some of the board companies are now making boards over an inch thick and these wont fit many of the racks that are out there, including ours. On option is to spread the forks open 1/16th to 1/8th of an inch so the board will fit. The board may not slide down all the way to the bottom of the fork but it should get close and be fine if strapped in well.