Not to many people run these showing amps a 2ohm load, b/c they take alot of power. not to many amps are stable @ 2ohm pushing 300-500 watts per module. There's also arguments that you should run all mid/highs as close to 4ohm as possible. In addition, if you think abotu it running a pair of addction in parallel (2ohm) would produce the same output as the same amp seeing 4ohms. drop the resistance, you'll increase wattage output , but will have to split it b/c yoru running them in parallel. The best way to run that 3004 is two bridge ch 1&2, and ch 3&4. yes you may get sound out of the speaker running the amp as 4ch and bridging it, but not for long.....
|