OK, so i winterized my boat over the weekend and thought I did everything correctly. Then I had a conversation with a fellow boater and he asked me if i drained the block prior to running the pink stuff through the boat.
My answer was no. I basically ran the boat and got it to temperature and then hooked up 5 gallons of the pink fluid and let it run through. I did see the pink fluid come out the exaust.
My question is was this good enough. Did all the water get through the motor as a result of the pink fluid coming through the exaust.
Should I have anything to worry about?
FYI- i did end up pulling the plugs on the manifolds and the circulation pump but not the block.
Thanks
|