I keep breaking the angle locks (the plastic silver things that the screw goes through to attach the bindings 2 the board) on my 2011 watsons and was wondering whether anyone else has the same problem. I'm usually pretty good at checking to make sure the screws are tight before I ride, so I don't think that's the problem. Also, I've noticed that the footbed of my bindings have bent slightly, so now the heels and toes of my bindings are about an eighth of an inch above my board, which causes the things to rock slightly like a rocking chair and drives me nuts. I'm thinking of putting a thin piece of rubber underneath the toe of the bindings, but don't want to make the problem worse.
|