fly high pro-x 750lb in rear locker?

(crushing76) · (crushing76) **Join Date: Feb 2007** 07-24-2007, 5:49 PM

Has anyone put the fly high pro-x 750lb sack in the rear locker of an 07 supra 21v? im worried that it might put too much pressure on the wall separating the storage compartment and the engine compartment, causing it to give... any thoughts?

(phat_in_cincy) · (phat_in_cincy) **Join Date: May 2003** 07-24-2007, 6:24 PM

Build supports for it like I did on our 205V.

http://www.wakesiderides.com/forums/index.php?showtopic=18468

Upload

(crushing76) · (crushing76) **Join Date: Feb 2007** 07-24-2007, 7:18 PM

NICE WORK!!! what are some of the other projects you have done on your boat? from the looks of this one, you are pretty crafty.

is that just a hole drilled in the top piece with a cap placed over the tip of the rod to minimize rattling?

(acurtis_ttu) · (acurtis_ttu) **Join Date: May 2004** 07-24-2007, 7:29 PM

I had them in the back of my 04 SSV and it bowed/warped the starboard material the walls are made of

(billthom) · (billthom) **Join Date: Apr 2005** 07-24-2007, 8:42 PM

I have them in my 05 21v, and have seen no problems yet. I stop just short of full, just to play it safe.

(phat_in_cincy) · (phat_in_cincy) **Join Date: May 2003** 07-24-2007, 9:40 PM

C.R.,
The rods ends were cut to length to be supported by the top divider bracket, and yes, the caps are to prevent them from rattling in the bracket.

You asked...so you can check out my other projects here...

http://www.wakesiderides.com/rides/index.php?page=out&id=1482

and/or here...

http://www.wakeboatworld.com/index.php?option=com_content&task=view&id=36&Itemi d=39

(dizzyj) · (dizzyj) **Join Date: Jul 2003** 07-25-2007, 5:37 AM

I have them in my '00 205v. I fill em up. the walls will bend out a bit because the old ones are a joke compared to pauls.