Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through July 11, 2007

Share 
Reply
 
Thread Tools Display Modes
Old     (brucemac)      Join Date: Dec 2005       06-25-2007, 1:12 PM Reply   
so i searched through all the threads, but i'm a little slow. it's monday and all.

got my anchor buddy. got a anchor kit with chain, rope, anchor

at the very least i want to anchor just off shore, best case come up with something for the houseboat, but it's an i/o so the stern setup won't work. what i'm wondering is, can't i still do the house boat deal by tying it up in reverse to all the inboard setups and climb in to the bow instead of the swim step? (careful of course).

more importantly, are the slalom buoy large enough to work for a buoy setup? and then lastly, what else do i need? i've got (2) 50' lines (not including anchor line). where's a good place to get galvy quick clips?

tia
Old     (rson)      Join Date: Jun 2002       06-25-2007, 1:21 PM Reply   
Whats your question.....where you get clips? or how to anchor your boat?
Old     (brucemac)      Join Date: Dec 2005       06-25-2007, 1:47 PM Reply   
both please

(Message edited by brucemac on June 25, 2007)
Old     (bobbym)      Join Date: Dec 2005       06-25-2007, 1:54 PM Reply   
http://www.wakeworld.com/MB/Discus/messages/65921/184899.html
Old     (brucemac)      Join Date: Dec 2005       06-25-2007, 2:06 PM Reply   
yeah i read that thread

1. are the slalom buoy's okay to use? big enough, etc? lare enough holes for clips?

2. the anchor buddy connects to the anchor chain right? not directly to the anchor. then what?
i'm really not dumb, and sure i'm probably making this too hard. i get the simple shore use setup, but i need help understanding what all i need for the buoy setup and how it connects.

i guess what's confusing me is what does that line that runs from the stern to the bouy used for?
Old     (trx1noob)      Join Date: Sep 2006       06-25-2007, 3:12 PM Reply   
Bruce, funny you ask. I just got done setting mine up this weekend and it works perfectly so far. I've got a switchblade on my boat, so I've got to run the bow closer to shore and get off that way. what i did is drop anchor about 30 feet off shore with the anchor buddy attached to the anchor(bucket of cement) on the hook of the anchor buddy, I attached a slalom buoy(tight fit, but sled it onto the hook) and I hook this to the back end of the boat. once hooked up I've got 2 options. I pounded a post on shore which i tied a 50 foot rope to. the other end of the rope has a caribener type hook on it(slid another slalom buoy onto this hook as well) option one is have somebody throw the ball/hook to you while standing on the bow, hook into the bow hook and they pull you in and you step off. option 2 is you drive the boat to shore(cut engine about 1/2 way between anchor and shore going slow and you step out and have the rope/ball sitting on shore and you hook it up yourself. there is actually about 5-10 seconds that you have to hook it up, it doesn't snap right back. sorry for the book, but it beat buying a 500 dollar canoe and having to paddle out to the boat. let me know if you have any other questions.
Old     (brucemac)      Join Date: Dec 2005       06-25-2007, 3:47 PM Reply   
okay, i'm headed to bworld for a couple buoys. do i need anything else? would a couple small chain locks make it easier to connect everything up? lastly, anybody know if that 50ft nylon rope from home depot will sink?

/edit again, i've got
anchor kit with chain and line
anchor buddy
couple of nylon (home depot) 50ft lines (used last year, but never tested to see if they sink)

(Message edited by brucemac on June 25, 2007)
Old     (mastercraft1995)      Join Date: Nov 2002       06-25-2007, 3:56 PM Reply   
I just sent you a PM explaining the best way to use an anchor buddy
Old     (brucemac)      Join Date: Dec 2005       06-25-2007, 3:57 PM Reply   
dude thanks sorry for being such a DA

Reply
Share 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 9:05 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us