99 to 03 Supra Launch Tower Location

(maxx_wake) · (maxx_wake) **Join Date: Sep 2003** 08-20-2008, 11:32 AM

I think this is probably a long shot but does anybody out there with a 99 to 03 Supra Launch know approximately where their tower feet hit the boat(the tower with two mounts per side). I have a 97 Sunsport and I need a new cover for it. I found one for a 2000 to 2003 Supra launch 21 that already has the cutouts for the tower that is actually $30 cheaper than the one for the SunSport without the cutouts. It is my understanding that the Sunsports and Launch are the same hull so I dont think that would be a big problem and just from the pictures I think it might be fairly close on the tower mounts. Here is a picture of my boat for reference.

Upload

(Message edited by maxx_wake on August 20, 2008)

pdxWAKE 08-20-2008, 1:07 PM

Not sure if this helps, but it is a pic of a stock 03 tower on a boat.
Upload

(laraujo) · (laraujo) **Join Date: Apr 2007** 08-20-2008, 2:34 PM

the opening of the front mount may fit but it looks like the rear one for yours is located in between the two rear mounts of ours.

here is pic of mine. Upload

(99_slaunch) · (99_slaunch) **Join Date: Oct 2005** 08-20-2008, 2:54 PM

Here is a pic of my 99
Upload

(maxx_wake) · (maxx_wake) **Join Date: Sep 2003** 08-20-2008, 6:59 PM

Thanks for posting all of the pictures. I am hoping the cover is for the tower like on Aarons because I think that might work. I am going to give them a call tomorrow to verify which model it is for.