Ok, so I have the new impeller installed correctly this time. Water shoots out the back normally and the temperature stays cool....in the driveway connected to a water hose. I took it to the lake last night to try it out and the temperature rose very rapidly and I had to turn it off within 3 minutes of starting it. I opened the engine cover and looked at what could still be wrong, and I noticed that there was almost no water in the strainer, and when I turned the motor on, almost no water was being sucked through the lines. When I checked the lines, there were no clogs or anything. At this point im thinking that the main water pump has gone bad, and if that isn't the case then hell I don't know what to do. I would post this on skidim.com but that board gets about 2 hits a day. Again, any and all help is appreciated and thanks in advance.
|