Need plans and/or designs for sliders

(bbr) · (bbr) **Join Date: Apr 2002** 07-26-2007, 10:06 AM

Nothing big and crazy. Slider rookies have to be able to hit them.

Lets see them pics, designs, or whatever you have!!

(lovin_the_wake)

Try this out he made a nice one
http://www.wakeworld.com/MB/Discus/messages/1/477615.html?1185109789

(bbr) · (bbr) **Join Date: Apr 2002** 07-26-2007, 10:48 AM

That looks good, but these will be permanent, and would prefer them not to float.

(Message edited by BBR on July 26, 2007)

(ttrigo) · (ttrigo) **Join Date: Dec 2004** 07-26-2007, 10:53 AM

you putting sliders in at BV???

(ogopogo) · (ogopogo) **Join Date: May 2005** 07-26-2007, 11:02 AM

This one is fun.....

Upload

(vin) · (vin) **Join Date: May 2007** 07-26-2007, 11:12 AM

bad boy, you could use the same plans as i did but just leave the barrels out and put in some legs to the ground.

(bbr) · (bbr) **Join Date: Apr 2002** 07-26-2007, 11:24 AM

Thomas,
Nope, not at BV. You can imagine how well that would go over.

Crash- that would be a possibility as well.

(bbr) · (bbr) **Join Date: Apr 2002** 07-26-2007, 11:25 AM

Thomas,
Nope, not at BV. You can imagine how well that would go over.

Crash- that would be a possibility as well.

(mammoth) · (mammoth) **Join Date: Apr 2005** 07-26-2007, 11:27 AM

B.B. - I don't think you would need much in the way of plans for a permanent slider. Determine your length, set pilings, and connect the dots with 2x6 lumber on end. Attach the sliding surface to the 2x6's.

(lfrider139) · (lfrider139) **Join Date: May 2007** 07-26-2007, 11:39 AM

yeah just like nate said, you can use trex board, (its the fake plastic decking stuff) they sell it at home depot and lowes, just attach that to the top of the 2x6s

(ttrigo) · (ttrigo) **Join Date: Dec 2004** 07-26-2007, 11:49 AM

I figured they would not be too keen on that there. have you asked Bates yet? he had a couple done at Elsi for that demo day. I am sure he has something.